Attached Awning Parts

	(Part # 1) Rollformed "C" channel.
	(Part # 2) Gutter facia.
	(Part # 2a) Gutter splice. (automatically sent with your order if needed.)
	(Part # 3) left side fascia. (the fascia, in most cases, is the same as the front gutter fascia. The pieces will be cut the appropriate lengths for your project)
	(Part # 4) right side fascia
	(Part # 5) 2 "blue" foam gutter end blocks.
	(Part # 6) 2 brackets for each post with slotted head bolts, fender washers, 3" Hex bolts & appropriate sized nuts. (Part # 7) Appropriate number of 3" square aluminum posts. (Standard length is 8'. If you need longer posts, they are available for a minimal extra charge)
	(Part # 8) 12" "W" Rollformed Aluminum Awning panels. (Pans)
	(Part # 9) Aluminum flashing
	(Part # 10) Downspout drop elbow (Part # 11) Downspout (10' lengths) (Part # 12) Downspout diversion elbow
	(Part # 14) 2 corner caps. (This piece is folded on the seams to make a 3-sided box to enclose the corners of your awning)

We're here to help!

Or email us:

Rontimco
P.O. Box 1696
Chico, California 95927
Int'l phone 530-589-9000
fax 530-5267-7729
email: info@rontimco.com