Cedar Embossed texture - Alumawood - 2-1/2in x 6in structural Flat panels

Cedar Embossed texture - Alumawood - 6-1/2in roll formed Gutter/Fascia

Cedar Embossed texture -Alumawood -Roll formed Corner Caps

Cedar Embossed texture - Alumawood - 2-1/2 inch roll formed C hanger

Scupper

Roll Formed Flashing

L/S Tube (supporting Arm)

Top Column Base Bracket

Valkem Caulking

Touch-Up Paint - 0.6 oz bottle or 12 oz can depending on kit

Gutter Plugs

2 in Hex bolt

3/4 in Hex bolt

4in Lag Screw for wall attachment w/o a ledger board or eave fascia.

# 10 x 5/8in Tek Screw

#10 x 1-1/4in Sheet Metal Screw When attaching to a ledger board or eave fascia. These will also be used for the bracket to wall attachment.

# 10 x 1/2in Sheet Metal Screws

Wall Attachment

If an awning is to be attached directly to the wall then 4 inch lag screws will be sent with the kit to attach the C hanger to the wall

Ledger Board

If the attachment is to a ledger board then 1-1/4in Sheet Metal Screws will be included in the kit.

Eave Attachment

If the attachment is to an Eave Fascia board then 1-1/4in Sheet Metal Screws will be included in the kit.